- Microsoft conversion tool ahci raid how to#
- Microsoft conversion tool ahci raid manuals#
- Microsoft conversion tool ahci raid manual#
Note: My PC comprises of a NVME, onto which the OS is installed and this is what is used for booting when SATA Mode is set to AHCI.
I'm now at a loss as to what I'm doing wrong, having followed the instructions and apparently creating the array each time, only to find it doesn't exist in Windows! Again, after creating the RAID 1 array and checking it via the Intel Rapid Storage Technology, changed the SATA Mode back to AHCI and rebooted into Windows. Tried the above again, but this time used the EZ RAID facility to create the RAID 1 array. In Windows, no sign of the RAID array, just two separate disks! So, changed back to AHCI and rebooted again (the BIOS was showing the RAID 1 array had been created). Note this Peripherals option is only shown if I reboot and go back into BIOS after changing the SATA Mode (as far as I can remember).Īfter saving changes and restarting, the PC wouldn't boot, presumably because it was no longer in AHCI mode. Step 2.: In Peripherals\ Intel Rapid Storage Technology create the RAID array as required. Step 1: (this was previously done as part of setting up Secure Boot) Step 2: Follow UEFI RAID Configuration steps in C-2. In Peripherals\SATA And RST Configuration, change SATA Mode Selection from "AHCI" to "Intel RST Premium With Intel Optane System Acceleration" Configuring SATA controller mode in BIOS Setup I followed this manual, with a few additions (to ensure things worked) as follows:ī.
Microsoft conversion tool ahci raid manual#
I am fully up-to-date with Windows 10, build 19044.įor what it's worth, the Gigabyte RAID manual I followed can be found here: My PC is on the latest version of the BIOS: F9e, dated 3/9/18 I even tried changing my BIOS settings back to use Legacy BIOS, but still can't get the RAID 1 array to build. I have tried following the instructions 3 times and although everything appears to work, the RAID 1 array is never visible in Windows, so something is going wrong. However, the RAID 1 array hasn't been created! Tried again, but this time switched the Sata Mode back to AHCI (which the instructions don't mention) and it successfully booted into Windows. Everything went okay, until rebooting when I received an error saying "INACCESSIBLE BOOT DEVICE". So, I downloaded the Gigabyte RAID manual and followed the rather clumsy instructions.
Eventually, I managed to do all of this, however, my RAID 1 array has been lost during the process and my PC now shows two separate disk drives, rather than the single "mirrored" drive. This involved converting my disks from MBR to GPT and switching from Legacy BIOS to UEFI.
Microsoft conversion tool ahci raid how to#
The Windows 11 update checker, told me I needed Secure Boot and TPM 2.0, so I read up and figured out how to change these BIOS settings. My PC has been running in Legacy BIOS mode for 4 years and I had 2 disks configured in a RAID 1 array.
Microsoft conversion tool ahci raid manuals#
Here I am again, 4 years on from my original PC build post ( ) and asking a similar question because the Gigabyte BIOS doesn't seem to be doing what it should and the Gigabyte manuals don't appear to reflect reality!
0 kommentar(er)
